Kyoritsu 5000 Instruction Manual Manual de usuario descargar pdf (Pagina 12)

―

10

―

Step1: Preparation

1. Connect the clamp sensor to the

instrument firmly with careful attention to

the orientation of the connector.

2. Press the button at least 1 sec. to

power on the instrument. Release the

button when all indications are

displayed on the LCD.

3. Time is displayed on the LCD for 1 sec.

If incorrect time is displayed each time

when the instrument is powered on,

battery for the clock may be exhausted.

In this case, send back the instrument to

your local KEW distributor from where it

was purchased.

4. Can make measurement right after

powering on the instrument. When

(non-connect) is displayed on the LCD,

a sensor is not connected to the

appropriate channel; or the connection

is incorrect.

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 43 44

Comentarios a estos manuales

Sin comentarios