Kyoritsu 5000 Instruction Manual Manual de usuario descargar pdf (Pagina 20)

―

5. State of One-time system is displayed.

on: Recording stops when memory becomes

full.

off: Overwrite the old data, and store the

latest data.

Press the button and proceed to

the next step when not changing the

setting.

To change the setting, press the

button.

Then the indication on the LCD flashes.

Press the or button to set

the value to the desired one. Then press

the button to confirm it.

6. Now Setting 1 is complete; "End" is

displayed on the LCD. Press the

button to return to the screen on which

"SEt.1" is displayed.

7. Press the button to get the instrument

ready for a measurement.

LED current indicator

* At the Event/ Max. value/ Capture recording modes, when the preset

current value is exceeded, the corresponding LED for each channel

flashes. The LED flashes each time when the preset current value is

exceeded during a measurement. The LED keep flashing once the

event that exceeds the preset current value occurs during a recording.

Press the button once to restore the flashing LED.

When the button is pressed, the instrument goes into Menu mode. Then

press the button. LED flashes when the preset current value

is exceeded again. Press the button to return to the measurement

screen; after the indications disappeared because of Power-save

function. In this case, the LED is turned off temporary . Press the

button and button again to turn off the LED completely.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 43 44

Sin comentarios

Kyoritsu 5000 Instruction Manual Manual de usuario Pagina 20