Kyoritsu 5020 Instruction Manual Manual de usuario descargar pdf (Pagina 13)

Following explains the flow of operation: through preparation to the stop

of recording.

P.11

P.12

P.13

P.15

P.17

* The recorded data can be viewed either by the following two methods.

(1) On a PC: Follow the instruction described at "10. Data transfer to

PC" in this manual (P.43) for data transfer, and Help for PC Software

"KEW LOG Soft 2" for operation method.

(2) On the instrument: Refer to Confirmation of recorded data (CALL)

(P.39)

* Press the

button at least 1 sec. to power off the instrument.

(This is because to prevent operational error.)

4. Recording procedures

▼

Step1: Start-up

Step2: Confirmation of the set value

▼

Step3: Preparation before recording

▼

Step4: Start of recoding

▼

Step5: Stop of recording

Select the appropriate sensor, and

connect it to the instrument.

Conﬁrm the recording mode.

Install the instrument and do setups for

each channel.

Start recording.

Stop recording.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 55 56

Sin comentarios

Kyoritsu 5020 Instruction Manual Manual de usuario Pagina 13