Kyoritsu 6305 Instruction Manual Manual de usuario descargar pdf (Pagina 107)

KEW6305 8.10

● To start measurement automatically at the preset time and date

1 Set the start time and date on SET UP range.

2 Then set the Function switch to DEMAND range, and press the START/STOP key.

3 File number screen is displayed for about 1 sec., followed by the measurement screen. The

instrument goes into stand-by mode for measurement. LED status indicator while the instrument is

in stand-by mode.

File number screen

(displayed for about 1 sec.)

Measurement screen

4 Measurement starts at the preset time and date, and the LED status indicator stop flickering and

remain on for the duration of the survey.

NOTE

* The start time and date should be set after the current time in such a way to give enough time to the

user to complete all settings before the survey starts.

* When the start time and date are set before the current time, measurement starts immediately upon

pressing the START/STOP key.

* When the preset start time and date come after the preset stop time and date, measurement stops right

after the start of measurement.

* Even if the start and stop time have been preset and the instrument is in standby mode, pressing the

START/STOP key at least 2 sec. will release

the stand-by mode and start a survey in Manual mode. This renders the start/ stop time and date

settings ineffective.

LED status indicato

flickers

LED status indicato

is on.

1 2 ... 102 103 104 105 106 107 108 109 110 111 112 ... 137 138

Sin comentarios

Kyoritsu 6305 Instruction Manual Manual de usuario Pagina 107