Kyoritsu 6305 Instruction Manual Manual de usuario descargar pdf (Pagina 89)

KEW6305 7.6

7.2 Survey closure

There are two ways of closing a survey.

(1) Manual operation

Pressing START/STOP key on Wh range for 2 sec. or more closes the survey. This action also

closes a survey started automatically at a preset time and date. LED status indicator goes off. The

survey is then closed.

(2) Automatic operation (presetting the time and date)

This can be done by presetting the stop time and date on SET UP range. LED status indicator

goes off. The survey is then closed.

NOTE

* A survey will be closed and lost when the instrument is switched off.

* Manually starting a survey renders a preset stop time and date ineffective. The survey has to be closed

manually in this case.

* If the survey duration is shorter than the integration interval (“Setting 09”) the measured data will not be

saved.

* If the preset start time and date come after the preset stop time and date, the survey cannot be done.

* Pressing the START/STOP key 2 sec. or more releases the stand-by mode.LED status indicator goes off.

7.3 Resetting the integration value

There are two methods for resetting the integration value and period from previous measurements.

a) Press ESC key on Wh range 2 sec. or more.

b) System reset

NOTE

* Integration value cannot be reset during a measurement or while the instrument is in stand-by mode.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 137 138

Sin comentarios

Kyoritsu 6305 Instruction Manual Manual de usuario Pagina 89