Kyoritsu 6305 Instruction Manual Manual de usuario descargar pdf (Pagina 116)

9.3 KEW6305

9.2 Placing / removing SD card

△DANGER

● Do not open the SD card Cover during a measurement.

△WARNING

● Ensure that Voltage test leads and Clamp sensors are removed from the

instrument, and that the Function switch is set at the “OFF” position when

placing/ removing SD card.

△CAUTION

● Ensure that the Function switch is set at the “OFF” position when placing/

removing SD card. Otherwise, the stored data may be lost or

the

instrument may be damaged.

● Inserting SD card:

(1) Loosen the screw for SD card cover, and open the SD card cover.

(2) Insert an SD card into SD card slot with the topside turned up.

(3) Then close the cover and tighten up the screw.

● Removing SD card:

(1) Loosen the screw for SD card cover, and open the SD card cover.

(2) Gently push the SD card towards inside, and then the card comes out. Remove the card slowly.

(3) Close the cover and tighten up the screw.

Function switch: OFF

SD Card connector cover

SD Card

SD Card Connector

1 2 ... 111 112 113 114 115 116 117 118 119 120 121 ... 137 138

Sin comentarios

Kyoritsu 6305 Instruction Manual Manual de usuario Pagina 116